ETS-Lindgren 7606 Coil Antenna/Shielded Coil - Manual (Page 35)

C ALIBRATION BY C ALCULATION
Following are the equations used in calculation of Model 7606 performance,
along with a sample calculation.
The absolute value of the ratio of the magnetic flux density to the voltage across
the connected load, BVL, is given by equation 11.
E QUATION 11
The coil resistance, Rc, is found from the length of wire in the coil and the unit
resistance of the wire; or, it can be measured with a low-resistance bridge. The
length of the wire is the product of the average circumference of the winding and
the number of turns. This is shown in equation 12.
E QUATION 12
The coil inductance, L, is found from equation 13.
MIL-STD-462D Method RS101 Testing | 35