ETS-Lindgren HI-4456 Isotropic Electric Field Probe (Archived) - Manual (Page 28)

HI n 4456 Manual Page — 23
APPENDIX A
ERROR CODES
Probe Error Output
If an error occurs, the probe will respond with one of the
following strings. These strings begin with a colon and
end with a carriage return.
E01 Communication error (e.g., overflow).
E02 Buffer full error. Too many characters
contained between the Start Character/
Carriage Return sequence.
E03 The received command is not valid.
E04 The received parameter is not valid.
E05 Hardware error (e.g., EEPROM failure).
E06 Parity error.
Archived 4/2/10