JDC Electronic SA Geos 11 - Manual (Page 12)

Wind speed
Measuring modes
Instantaneous wind speed Maximum wind speed Average wind speed
The measuring modes for the maximum and average wind speeds are
displayed on the upper block, while the instantaneous wind speed is
displayed on the large block. In order to access the measuring mode for
the maximum reached or average wind speed, select (with the help of the
button) the upper block (it flashes), then use the button to modify
the block display and switch from one measuring mode to another.
Resetting the maximum wind speed to zero
Select the upper block and display the measuring mode for the maximum
wind speed (it flashes), then press the
button for 2 seconds.
Selecting the unit of measurement
The instrument features 6 units of measurement in relation to wind
speed: km/h (kilometres per hour), mph (miles per hour), knots, m/s
(metres per second), fps (feet per second) and Beaufort (Beaufort scale).
To change the unit of measurement, select the large block (it flashes),
then keep the
button down; when the desired unit appears, release the
button to confirm your choice.
Temperature
Measuring modes
Ambient
temperature
Minimum
temperature
Maximum
temperature
Instantaneous
windchill
temperature
Minimum
windchill
temperature
Maximum
windchill
temperature
12