Jeep 2009 Wrangler - Owner Manual User Manual
Page 116
Advertising
b. Lay the soft top into the rear of the vehicle with the
bows pointing forward and the curved portion of the
bows facing upward.
c. Tap the knuckles on the side with a rubber mallet to
reattach them to the metal pivot brackets.
d. Screw the pivot screws back into place using a #T30
Torx
head driver. Secure them until they are snug,
being careful not to cross-thread the screws or over-
tighten.
114
UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Advertising
This manual is related to the following products: