To lock the doors and swing gate, Using the panic alarm, To turn off “flash lights with lock – Jeep 2009 Wrangler - Owner Manual User Manual

Page 23

Advertising
background image

To Lock the Doors and Swing Gate
Press and release the LOCK button on the RKE transmit-
ter to lock all doors. The turn signals will flash and the
horn will chirp once to acknowledge the lock signal. If
desired, the “Sound Horn On Lock” feature can be
turned on or off using the following steps:

1. Press the RKE transmitter LOCK button for 4 to
10 seconds.

2. While the LOCK button is pressed (after four seconds),
press the RKE transmitter PANIC button. Release both
buttons.

The “Sound Horn On Lock” feature can be reactivated by
repeating this procedure.

Using The Panic Alarm
To turn the Panic Alarm feature on or off, press and hold
the PANIC button on the RKE transmitter for at least one
second and release. When the Panic Alarm is activated,

the headlights and park lights will flash, the horn will
pulse on and off and the interior lights will turn on.

The Panic Alarm will stay on for three minutes unless
you turn it off by pressing the PANIC button a second
time, or if the vehicle speed is 5 mph (8 km/h) or greater.

NOTE:

When you turn off the Panic Alarm by pressing

the PANIC button a second time, you may have to be
closer to the vehicle due to the radio frequency noises of
the system.

To Turn Off “Flash Lights With Lock”

NOTE:

The “Flash Lights With Lock” feature can be

turned on or off using the following steps:

1. Press the RKE transmitter UNLOCK button for 4 to
10 seconds.

2

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

21

Advertising
This manual is related to the following products: