Jacking instructions – Jeep 2009 Wrangler - Owner Manual User Manual

Page 393

Advertising
background image

2. Set the parking brake.

3. Shift the automatic transmission into PARK, or a
manual transmission into REVERSE.

4. Turn the ignition to LOCK.

5. Turn on the Hazard Warning flasher.

6. Block both the front and rear of the
wheel diagonally opposite of the jack-
ing position. For example, if changing
the right front tire, block the left rear
wheel.

NOTE:

Passengers should not remain in the vehicle

when the vehicle is being jacked.

Jacking Instructions

WARNING!

Carefully follow these tire changing warnings to
help prevent personal injury or damage to your
vehicle:
Always park on a firm, level surface as far from

the edge of the roadway as possible before raising
the vehicle.

Block the wheel diagonally opposite the wheel to

be raised.

Set the parking brake firmly and set an automatic

transmission in PARK; a manual transmission in
REVERSE.

Never start or run the engine with the vehicle on a

jack.

(Continued)

6

WHAT TO DO IN EMERGENCIES

391

Advertising
This manual is related to the following products: