Jeep 2009 Wrangler - Owner Manual User Manual
Page 174
Advertising
10. Open the header latches and engage the hook on each
side onto the windshield loops (do not close the latches).
11. If the swing gate brackets were removed, install them
by hooking the rear edge of the bracket on the interior
side of the body channel. Then, rotate it rearward and
over the channel until it snaps onto the exterior part of
the rail. To be properly located, the bracket must only be
clipped to the shortened rail edge.
172
UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Advertising
This manual is related to the following products: