Canon 1D X - Manual (Page 203)

203
A Shooting with the LCD Monitor
Each time you press the <B> button, the information display will
change.
About the Information Display
ISO speed
Possible shots
Exposure level
Aperture
Shutter speed
Battery check
Exposure
simulation
Drive mode
White balance
Flash exposure
compensation
AF mode
•d : Live mode
•c : Face detection Live
mode
•f: Quick mode
AF point (Live mode)
FEB
AEB
Highlight tone priority
Histogram
Multiple exposures
AE lock
Flash-ready
Picture Style
Auto Lighting Optimizer
Shooting mode
Magnification/
Magnifying position
Digital compass
The histogram can be displayed when [Expo. simulation: Enable] is set
(p.207).
You can display the electronic level by pressing the <B> button
(p.62). Note that if the AF mode is set to [u Live mode] or the camera is
connected to a TV set with an HDMI cable, the electronic level cannot be
displayed.
When <g> is displayed in white, it indicates that the Live View image
brightness is close to what the captured image will look like.
If <g> is blinking, it indicates that the Live View image is not being
displayed at the suitable brightness due to low- or bright-light conditions.
However, the actual image recorded will reflect the exposure setting.
If flash is used or bulb is set, the <g> icon and histogram will be
grayed out (for your reference). The histogram may not be properly
displayed in low- or bright-light conditions.
COP
Y