Canon 1D X - Manual (Page 361)

361
With the AC Adapter Kit ACK-E4 (sold separately), you can connect the
camera to a household power outlet and not worry about the remaining
battery level.
1
Connect the DC Coupler’s plug.
Connect the DC Coupler’s plug to the
AC adapter’s DC terminal.
2
Connect the power cord.
Connect the power cord as shown in
the illustration.
After using the camera, unplug the
power plug from the power outlet.
3
Insert the DC Coupler.
Insert the DC Coupler firmly all the
way, and turn the release handle as
shown by the arrow.
Using a Household Power Outlet
Since the DC Coupler is not water-resistant, do not get it wet.
Do not connect or disconnect the power cord or DC Coupler while the
camera’s power switch is set to <1/R>.
COP
Y