Canon 1D X - Manual (Page 326)

326
3 Custom Function Settings
C.Fn3: Drive
Continuous shooting speed
You can set the continuous shooting speed for <o> high-speed
continuous shooting and <p> low-speed continuous shooting.
High speed
You can set it from 2 to 12 shots/sec.
Low speed
You can set it from 1 to 11 shots/sec.
Limit continuous shot count
You can limit the maximum burst during continuous shooting so that the
camera stops shooting after the set number of continuous shots is taken.
You can set it within 2 to 99 shots. Pressing the <L> button will return the
setting to [Disable].
If [Disable] is set, continuous shooting can continue up to the maximum
burst (p.122) displayed in the viewfinder.
Restrict drive modes
You can restrict the drive modes selectable with the <o> button.
Select a drive mode (u/o/p/k/l/B/V) to be made
selectable, then press <0> to append a checkmark <X>.
If you set 12 or 11 shots/sec. for <o> or 11 shots/sec. for <p> and use
ISO 32000 or higher (when the camera’s internal temperature is low, ISO
20000 or higher), the maximum continuous shooting speed will be approx.
10 shots/sec. If Auto ISO is set and ISO 32000 or higher (when the
camera’s internal temperature is low, ISO 20000 or higher) is set
automatically, the maximum continuous shooting speed will be approx. 10
shots/sec.
You cannot select <V> with the <o> button in the default
setting. To make <V> selectable for super high-speed continuous
shooting, append a checkmark <X> (p.111).
At least one drive mode must be checkmarked <X>.
COP
Y