Canon 1D X - Manual (Page 62)

62
Displaying the Grid and Electronic Level
1
Press the <B> button.
Each time you press the <B>
button, the screen display will
change.
Display the electronic level.
If the electronic level does not
appear, set [52: z button
display options] so that the
electronic level can be displayed
(p.358).
2
Check the camera’s tilt.
The horizontal and vertical tilt are
displayed in 1° increments.
When the red line turns green, it
indicates that the tilt is corrected.
Displaying the Electronic Level on the LCD Monitor
Vertical level
Horizontal level
Even when the tilt is corrected, there may be a margin of error of ±1°.
If the camera is very tilted, the electronic level’s margin of error will be bigger.
You can also use the procedure above to display the electronic level during
Live View shooting and before shooting a movie (p.203, 227). Note that the
electronic level cannot be displayed during movie shooting. (The electronic
level will disappear when you start shooting a movie.)
COP
Y