Canon 1D X - Manual (Page 385)

385
You can check the camera’s serial number, firmware version, and
shutter release cycles on the screen. You can also check the status log
for past Error and Caution messages.
Use this function to check the camera’s condition. If necessary, take the
camera to your nearest Canon Service Center for maintenance to
minimize camera problems in the future.
1
Select [System status display].
Under the [54] tab, select [System
status display], then press <0>.
2
Check the system status.
You can check the serial number,
firmware version, and shutter release
cycles.
You can check the camera’s past errors, caution history, and the lens,
flash, and battery used when the error or caution occurred.
3
Check the log.
In step 2, press the <B> button.
X The camera’s status log will be
displayed.
“Err **” is an error message. For the
error messages, see page 388.
“Caution **” is a caution message.
For the caution messages, see the
next page.
3 System Status Display
Check the Error and Caution Log
COP
Y