Kontron CP3003-V uEFI BIOS - Manual (Page 11)

CP3003-SA/CP3003-V uEFI BIOS Starting uEFI BIOS Setup
ID 1053-4014, Rev. 2.0 Page 5
D R A F T — F O R I N T E R N A L U S E O N L Y
1.2 Navigation
The CP3003-SA/CP3003-V uEFI BIOS setup program uses a hot key-based navigation sys-
tem. A hot key legend is located in the right frame on most setup screens.The following table
provides information concerning the usage of these hot keys.
HOT KEY DESCRIPTION
<F1> The <F1> key is used to invoke the General Help window.
<F2> The <F2> key is used to restore the previous values.
<F3> The <F3> key is used to load the defaults.
<F4> The <F4> key is used to save the current settings and exit the uEFI BIOS Setup.

Right/Left The Right and Left <Arrow> keys are used to select a major Setup screen.
For example: Main Screen, Advanced Screen, Chipset Screen, etc.

Up/Down The Up and Down <Arrow> keys are used to select a Setup function or a sub-screen.
+ -
Plus/Minus The Plus and Minus <Arrow> keys are used to change the field value of a particular Setup
function, for example, system date and time.
<ESC> The <ESC> key is used to exit a menu or the uEFI BIOS Setup.
Pressing the <ESC> key in a sub-menu causes the next higher menu level to be displayed.
When the <ESC> key is pressed in a major Setup menu, the uEFI BIOS Setup is terminated
without saving any changes made.
<Enter> The <Enter> key is used to execute a command or select a menu.