Kontron CP3003-V uEFI BIOS - Manual (Page 58)

The uEFI Shell CP3003-SA/CP3003-V uEFI BIOS
Page 52 ID 1053-4014, Rev. 2.0
D R A F T — F O R I N T E R N A L U S E O N L Y
6.2.5 kbootnsh uEFI Shell Command
USAGE:
(continued)
Boot from device containing the string "SanDisk":
Shell> kboot -n SanDisk
Boot from first device found that is of type harddrive:
Shell> kboot -t harddrive
Boot from device using the path to the device:
Shell> kboot -p "PciRoot(0x0)/Pci(0x1f,0x2/Sata(0x1,0x0)"
kbootnsh
FUNCTION: Manage the startup script stored in the flash
SYNTAX: kbootnsh [-?] [-b] [-d] [[-g] [-p] <filename>]
where:
-b Display output page by page
-? Show online help
-g <filename> Store the current boot script to disk. If there is no phys-
ical disk drive present, the kmkramdisk command
may be used.
-p <filename> Store the shell script pointed to by filename to flash.
Note: The shell script cannot be larger then 400
bytes.
-d Delete the current startup script from flash.
DESCRIPTION: The kbootnsh command manages the flash-stored startup script. If the
shell is launched by the boot process, it executes a shell script stored in
the flash. If the shell script terminates, the shell will continue the boot
process. However, the shell script can of course contain any other boot
command.
USAGE: Get current startup script to file named boot.nsh
COMMAND / RESPONSE EXAMPLE:
Shell> kbootnsh -g boot.nsh
Store file named boot.nsh to flash:
COMMAND / RESPONSE EXAMPLE:
Shell> kbootnsh -p boot.nsh
Delete startup script:
COMMAND / RESPONSE EXAMPLE:
Shell> kbootnsh -d
kboot