Kontron CP3003-V uEFI BIOS - Manual (Page 25)

CP3003-SA/CP3003-V uEFI BIOS Main Setup
ID 1053-4014, Rev. 2.0 Page 19
D R A F T — F O R I N T E R N A L U S E O N L Y
2.7.2.2.6 Flow Control
Default setting: None
2.7.2.2.7 VT-UTF8 Combo Key Support
Use this function to enable or disable VT-UTF8 Combination Key Support for ANSI/ VT100 ter-
minals.
Default setting: Enabled
2.7.2.2.8 Recorder Mode
Use this function to specify whether display formatting characters are to be transmitted along
with data or if only data is to be transmitted.
Default setting: Disabled
2.7.2.2.9 Resolution 100x31
Default setting: Enabled
2.7.2.2.10 Legacy OS Redirection
Default setting: 80x24
SETTING DESCRIPTION
None Use one of these settings to specify the type of flow control to be used for this serial port.
Hardware RTS/CTS
SETTING DESCRIPTION
Disabled Use this setting the disable combination key support.
Enabled Use this setting the enable combination key support.
SETTING DESCRIPTION
Disabled Use this setting to specify normal terminal operation.
Enabled Use this setting to specify that only text will be sent. Use this to capture terminal data.
SETTING DESCRIPTION
Disabled Use this setting the disable extended terminal resolution.
Enabled Use this setting the enable extended terminal resolution.
SETTING DESCRIPTION
80x24 Use one of these settings to select the number of rows and columns for legacy OS redirec-
tion.
80x25