Kontron CP3003-V uEFI BIOS - Manual (Page 53)

CP3003-SA/CP3003-V uEFI BIOS The uEFI Shell
ID 1053-4014, Rev. 2.0 Page 47
D R A F T — F O R I N T E R N A L U S E O N L Y
OPTIONS:
(continued)
WrProtSata: Used to select onboard SATA flash write protection
If enabled, the onboard SATA flash is write-protected
after POST. OS needs to be prepared to work with
write-protected flash. For further information, refer to
the operating system’s documentation.
Note: Please contact Kontron before using this
function.
WrProtEeprom: Used to select onboard system EEPROM write
protection
If enabled, the system EEPROM is write-protected
after POST.
WrProtSpi Used to select onboard SPI boot flash write protection
If enabled, both of the onboard SPI boot flashes are
write-protected after POST.
IntelVT Used to enable Intel® VT-x Virtualization Technology
IntelHT Used to enable Intel® Hyper-Threading Technology
SpeedStep Used to enable Intel® SpeedStep®
CpuTurbo Used to enable CPU turbo mode
C3State Used to enable CPU C3-State report to OS
C6State Used to enable CPU C6-State report to OS
C7State Used to enable CPU C7-State report to OS
PciCfgDelay Used to set a delay for PCI config cycles
kboardconfig (continued)