2 ordering information – Kontron VM62 User Manual

Page 8

Advertising
background image

Chapter 1 Introduction

VM62(A) / VM42(A) User’s Manual

1.2 Ordering Information

Name

Description

Order No

VM62-BASE

VMEbus single board computer comprising MC68060 @ 50 MHz,
MC68EN360 @ 25 MHz, 256 kByte dual-ported SRAM (with Gold Cap for
backup), configured for use with the AutoBahn interface piggyback, up to 6
serial interfaces (2 available on the front panel as RS232 and an additional 4
divided between the CXC interface and SI-Interface), CXC Interface, PEPbug.

12349

VM62-BASE

Same as order no. 12349 but with 1 MByte dual-ported SRAM

12350

VM42-BASE

VMEbus single board computer comprising MC68040 @ 33 MHz,
MC68EN360 @ 33 MHz, 256 kByte dual-ported SRAM (with Gold Cap for
backup), configured for use with the AutoBahn interface piggyback, 6 serial
interfaces (2 available on the front panel as RS232 and an additional 4 divided
between the CXC interface and SI-Interface), CXC Interface, PEPbug.

12344

VM42-BASE

Same as order no. 12344 but with 1 MByte dual-ported SRAM

12345

VM42-BASE

Same as order no. 12344 but with MC68040V @ 33 MHz (3.3-V technology)

12346

VM42-BASE

Same as order no. 12346 but with 1 MByte dual-ported SRAM

12347

DM600

Memory piggyback with 4 MByte DRAM and 1 MByte Flash EPROM

11852

DM600

Memory piggyback with 4 MByte DRAM and 4 MByte Flash EPROM

11853

DM601

Memory piggyback with 16 MByte DRAM and 1 MByte Flash EPROM

11854

DM601

Memory piggyback with 16 MByte DRAM and 4 MByte Flash EPROM

11855

DM602

Memory piggyback with 1 MByte DRAM and 1 MByte Flash EPROM

12765

DM603

Memory piggyback with 32 MByte DRAM and 512 kByte Flash EPROM

13027

DM603

Memory piggyback with 32 MByte DRAM and 2 MByte Flash EPROM

13627

SI-10B2

10Base2 (Thin) Ethernet (cheapernet) interface with RG58 (coax) connector

9925

SI-10B5

10Base5 (AUI) Ethernet interface piggyback with 15-pin D-Sub connector

9924

SI-10BT

10BaseT (Twisted pair) Ethernet interface piggyback with RJ45 connector

9926

SI-DUMMY

Front panel only fitted when no SI piggyback required

12351

SI-PB232

Serial interface piggyback for 2 RS232 connections (Modem interface) with 2
RJ45 connectors

11850

SI-PB232-ISO

Serial interface piggyback for 1 RS232 optoisolated connection with 1 RJ45
connector (Available in 1996 if requested)

11851

SI-PBPRO

RS485 optoisolated interface piggyback for 2 wire half-duplex (PROFIBUS)
connection with 9-pin D-Sub connector

9927

MP-AB100

AutoBahn interface piggyback complete with all control logic, 128 kByte 32-
bit fast SRAM as buffer for AutoBahn data transfer with Spanceiver MC
100SX1451 of 50/100 MByte/s

9923

CABLE-VM42-
232

3 meter RS232 Serial Interface cable for VM42(A) / VM62(A) with 9-pin
female D-Sub (PC pinout) to RJ12 connector

12383

Page 1-2

© 1995 PEP Modular Computers

May 17, 1996

Advertising
This manual is related to the following products: