3 memory display, 4 port format, Appendix bootstrap loader – Kontron VM162 User Manual
Page 100
Appendix Bootstrap Loader
Page BOOT- 8
© PEP Modular Computers
Juli 23, 1997
4.3 Memory Display
Syntax
md [<adr>]
Description
Without parameters specified, the FLASH contents starting at 0x4000000 are displayed. This function is not limited to
FLASH and other address ranges can be specified.
Note: The ResetPC in FLASH is not identical to the ResetPC from the programming source (S-records memory block).
4.4 Port Format
Syntax
pf [<port> [<baud>][/[<bitschar>][/[<parity>][/<stops>]]]]
Description
Without parameters specified, the current serial port settings are displayed.
<port> specifies the serial port. Valid values are term or serO.
<baud> specifies the baud rate. The values 50, 75, 110, 134.5, 150, 300, 600, 1200, 1800, 2000, 2400, 3600, 4800, 7200,
9600, 19200 and 38400 Baud can be specified.
<bitschar> specifies the bits / character. Valid values are 7 or 8.
<parity> specifies if parity should be checked / generated. The value n specifies none, o for odd and e for even parity.
<Stops> specifies the stopbits which will be generated. Valid values are 1 or 2.
Note: No spaces are allowed between the options. Options must be separated with the '/'. Not all options must be specified,
but the '/' characters must be present to distinguish the different options from each other. The sequence can be aborted after
every option.
Examples
Setting term to 300 Baud, 7 Bits/char, odd parity and 2 stopbits:
pf term 300/7/o/n
Set the bits / character field to 7 for ser0 only:
pf ser0 /7