8 ip memory size control, 9 ip interface address map – Kontron VM162 User Manual

Page 54

Advertising
background image

VM162/VM172

Chapter 2 Functional Description

Page 2- 32

© PEP Modular Computers

Juli 23, 1997

2.10.8 IP Memory Size Control

After a board reset the IP Memory Size is set to 8 MB linear address space by default. By setting Bit 3
of the IP Slot Control register (Memory size bit) the linear addressable memory space can be reduced
from 8 MB to 1 MB.

If 1 MB is selected the whole IP memory address space of 8 MB is available further on. The currently
used memory page (1-of-8 1MB pages) is determined by the memory page bits within the Slot Control
register (Bit 2-0).

Note: This feature is implemented for compatibility reasons to further IP Carrier boards with reduced
address space.

2.10.9 IP Interface Address Map

IPa:

IPb:

Note: Whether 1 or 8 MByte memory address space is selected depends on the memory size bit within
the IP slot control register. Depending on the memory size bit, the memory page bits are relevant or not.
Default is 8 MByte, not paged.

Base Address

(HEX)

Size

Port Width

Device

CE 00 08 00

128 Byte

D8-D16

IP Slot a IO Space

CE 00 08 80

128 Byte

D8-D16

IP Slot a ID Space

CE 00 09 01

128 Byte

D8

IP Slot a Interrupt Control register

CE 00 09 81

128 Byte

D8

IP Slot a Control ragister

D0 00 00 00

1 or 8 MB

D8-D16

IP Slot a Memory Space

Base Address

(HEX)

Size

Port Width

Device

CE 00 0A 00

128 Byte

D8-D16

IP Slot b IO Space

CE 00 0A 80

128 Byte

D8-D16

IP Slot b ID Space

CE 00 0B 01

128 Byte

D8

IP Slot b Interrupt Control register

CE 00 0B 81

128 Byte

D8

IP Slot b Control ragister

D0 80 00 00

1 or 8 MB

D8-D16

IP Slot b Memory Space

Advertising
This manual is related to the following products: