4 command reference, 1 boot wait, 2 load flash – Kontron VM162 User Manual
Page 99: Appendix bootstrap loader, 4command reference 4.1 boot wait
Appendix Bootstrap Loader
Juli 23, 1997
Page BOOT- 7
© PEP Modular Computers
4
Command Reference
4.1 Boot Wait
Syntax
bw [<time>]
Description
Without parameters, bw displays the current setting.
For <time> 1, 2, 5, 10, 20 and 50 may be specified as time in seconds. Other values are not supported.
4.2 Load Flash
Syntax
If [-ol=]<offset>] [-u] [-q] [-c] [-m[=]<adr> -I[=]<len]
Description
Without parameters, the FLASH is loaded using S-records over the term port.
'<offset>' is a signed 32 bit offset which is added to every record and can be used to move the S-records to the FLASH po-
sition.
Note:This ontion must be used if 51 or S2 records are used.
'-u' must be used to download over ser0.
'-q' suppress all messages except error messages.
'-c' clears all untouched sectors and leaves no old code fragments.
For a Load Flash from an absolute address, the -m / -I options must be used.