Kontron KTLX800-pITX - Manual (Page 26)

KTD-S0022-C Page 21 Serial-ATA Interface (S-ATA)
KTLX800/pITX User's Guide
Interface (S-ATA)
uiring only 6 wires.
9
he S-ATA interface is available through the standard L-type connector J1400 (7 pins). A S-ATA interface
cable is deliverable from KONTRON (KAB-SATA-1, part number 96079-0000-00-1).
9 Serial-ATA
The KTLX800/pITX has realized one S-ATA I port. Serial-ATA connections boost the transfer rate theoreti-
cally up to 150 MB/sec. In addition it changes the parallel interface requiring 40 separate wires to a serial
interface req
.1 Connector
T
Header Pin Signal Name Function
1 GND Ground
2 TX+ Transmit (positive)
3 TX- Transmit (negative)
4 GND Ground
5 RX- Receive (negative)
6 RX+ Receive (positive)
1
7 GND Ground