Kontron KTLX800-pITX - Manual (Page 48)

KTD-S0022-C Page 43 Setup Guide
KTLX800/pITX User's Guide
20.5.3 Display Configuration Submenu
Feature Option Description
VGA BIOS Rev ision N / A Show the VGA BIOS revision
Protocols N / A Show supported protocols (e.g. JILI3, EDID, DisplayID)
Frame Buffer Size 8 MB
16 MB
32 MB
64 MB
128 MB
254 MB
Select the amount of system memory used by the onchip
graphic controller
Boot Display Device CRT Only
LCD Only
CRT & LCD
Control the boot display
Flat Panel Type Au yID) to (Displa
VGA 640x480
WVGA 800x480
SVGA 800x600
XGA 1024x768
Select a predefined flat panel resolution. If Auto the
board is searching for a DisplayID (VESA) record
Color Mapping FPDI
LDI
FPDI = Flat Panel Display Interface
LDI = LVDS Display Interface
Only valid of color depth = 24 bit
Backlight Brightness 0 %, 10 %, 20%
30 50 % %, 40 %,
60 %, 70 %, 80 %
90 %, 100 %
Set the backlight value (0% = 0V, 100% = +5V)