3 connector (higher 8 bits), 4 connecto, R redirection – Kontron KTLX800-pITX User Manual
Page 32: Ktlx800/pitx user's guide
KTD-S0022-C
Page 27
Digital I/O Interface
KTLX800/pITX User's Guide
open
ended) is deliverable from KONTRON (KAB-GPIO-PROTO-10, part number 62038).
13.3
Connector (Higher 8 Bits)
The higher digital I/O pins are available through the connector J1302 (10 pins). An interface cable (
Header
Pin
Signal Name
Function
VCC
1)
1
Power +3.3V
2
GPIO12
Bidirectional I/O 12
3
GPIO8
Bidirectional I/O 8
4
GPIO13
Bidirectional I/O 13
5
GPIO9
Bidirectional I/O 9
6
GPIO14
Bidirectional I/O 14
7
GPIO10
Bidirectional I/O 10
8
GPIO15
Bidirectional I/O 15
9
GPIO11
Bidirectional I/O 11
1
GND
Ground
10
13.4 Connecto
When the board is sh
O pin are routed to a
in Mo
connector on the RTC
battery module. The onboard connector J1300 can be used when the RTC battery module is disassembled.
r Redirection
ipped the lower digital I/
s
10 p
lex