Kontron KTLX800-pITX - Manual (Page 49)

KTD-S0022-C Page 44 Setup Guide
KTLX800/pITX User's Guide
20.5.4 ACPI Configuration Submenu
Feature Option Description
Power Management Disabled
ACPI
Ena ement ble/disable the power manag
Suspend Mode S3 (STR) Define the power down mode (STR = Suspend To RAM)
Wake On LAN Disabled
Enabled
Ena e On LAN (WOL) feature ble/disable the Wak
Active Cooling Disabled
Enabled
Enable/disable the active cooling
Active Trip Point Disab led, 40°C
45°C, ... 95°C
Determine the temperature of active trip point - the point at
whi
the CPU fan ch the OS will turn on/off
Active Hysteresis 1°C, 2°C, ... 5°C
6°C ... 10°C
Set the hysteresis for the active trip point
Polling Time 5 Sec., 10 Sec.
15 Sec., .. 30 Sec.
35 Sec, 40 Sec.
50 Sec., 60 Sec.
Define the thermal zone polling time
Critical Trip Point Disabled, 70°C
75°C .
C .. 100°
This value controls the temperature of the point at which the
OS will shut off the system
20.5.5 Miscellaneous Submenu
Feature Option Description
8Temperature Monitor Submenu Display the CPU and board temperature
8Fan Speed Control Submenu Control the fan speed
20.5.5.1 Temperature Monitor Submenu
Feature Option Description
Shutdown Temperature Disabled
60°C / 65°C
70°C / 75°C
80°C / 85°C
90°C ... 100°C
Define the shutdown temperature
Attention: not identical with 'Critical Trip Point'
CPU Temperature N / A Show the CPU temperature
Board Temperature N / A Show the board temperature