Kontron AM4022 IPMI Firmware - Manual (Page 15)

AM4022 IPMI Firmware
ID 1052-3624, Rev. 1.0 Page 15
EVENT COMMANDS M
Set Event Receiver 29.1 S/E 00h M / Yes
Get Event Receiver 29.2 S/E 01h M / Yes
Platform Event (a.k.a. “Event Message”) 29.3 S/E 02h M / Yes
PEF AND ALERTING COMMANDS O
Get PEF Capabilities 30.1 S/E 10h O / No
Arm PEF Postpone Timer 30.2 S/E 11h O / No
Set PEF Configuration Parameters 30.3 S/E 12h O / No
Get PEF Configuration Parameters 30.4 S/E 13h O / No
Set Last Processed Event ID 30.5 S/E 14h O / No
Get Last Processed Event ID 30.6 S/E 15h O / No
Alert Immediate 30.7 S/E 16h O / No
PET Acknowledge 30.8 S/E 17h O / No
SENSOR DEVICE COMMANDS M
Get Device SDR Info 35.2 S/E 20h M / Yes
Get Device SDR 35.3 S/E 21h M / Yes
Reserve Device SDR Repository 35.4 S/E 22h M / Yes
Get Sensor Reading Factors 35.5 S/E 23h O / No
Set Sensor Hysteresis 35.6 S/E 24h O / Yes
Get Sensor Hysteresis 35.7 S/E 25h O / Yes
Set Sensor Threshold 35.8 S/E 26h O / Yes
Get Sensor Threshold 35.9 S/E 27h O / Yes
Set Sensor Event Enable 35.10 S/E 28h O / Yes
Get Sensor Event Enable 35.11 S/E 29h O / Yes
Re-arm Sensor Events 35.12 S/E 2Ah O / No
Table 3: Standard IPMI Commands (Continued)
COMMAND
IPMI 2.0
SPEC.
SECTION
NETFN CMD
KONTRON
SUPPORT
ON MMC