Kontron MSM800BEV - Manual (Page 8)

MSM800BEV / User Information
www.kontron.com 6
1 User Information
1.1 About this Document
This document provides information about products from Kontron AG and/or its subsidiaries. No warranty of
suitability, purpose, or fitness is implied. While every attempt has been made to ensure that the information in this
document is accurate, the information contained within is supplied "as-is" and is subject to change without notice.
For the circuits, descriptions and tables indicated, Kontron assumes no responsibility as far as patents or other rights
of third parties are concerned.
1.2 Copyright Notice
Copyright © 2003-2010 Kontron AG
All rights reserved. No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval
system, or translated into any language or computer language, in any form or by any means (electronic, mechanical,
photocopying, recording, or otherwise), without the express written permission of Kontron AG.
DIMM-PC ® , PISA ® , ETX ® , ETXexpress ® , microETXexpress™, X-board ® , DIMM-IO ® and DIMM-BUS ® are trademarks or
registered trademarks of Kontron AG. Kontron is trademark or registered trademark of Kontron AG.
1.3 Trademarks
The following lists the trademarks of components used in this product.
»
IBM, XT, AT, PS/2 and Personal System/2 are trademarks of International Business Machines Corp.
»
Microsoft is a registered trademark of Microsoft Corp.
»
Intel is a registered trademark of Intel Corp.
»
All other products and trademarks mentioned in this manual are trademarks of their respective owners.
1.4 Standards
Kontron AG is certified to ISO 9000 standards.
1.5 Warranty
This Kontron AG product is warranted against defects in material and workmanship for the warranty period from the
date of shipment. During the warranty period, Kontron AG will, at its discretion, decide to repair or replace defective
products.
Within the warranty period, the repair of products is free of charge as long as warranty conditions are observed.
The warranty does not apply to defects resulting from improper or inadequate maintenance or handling by the buyer,
unauthorized modification or misuse, operation outside of the product’s environmental specifications or improper
installation or maintenance.
Kontron AG will not be responsible for any defects or damages to other products not supplied by Kontron AG that are
caused by a faulty Kontron AG product.