Kontron SMARC Evaluation Carrier - Manual (Page 43)

User’s Guide
43 www.kontron.com
11 I/O Mezzanine
The I/O Mezzanine site accepts a 68mm x 52mm I/O Module. The I/O Module may be created by Kontron or by Kontron
customers.
The Evaluation Carrier interface to the I/O Module is over a 100 pin Hirose FX8 connector pair.
Vendor Vendor P/N Where Used Kontron PN
Hirose FX8-100S-SV SMARC Evaluation Carrier 1051-7773
Hirose FX8-100P-SV IO Mezzanine Board 1044-9102
The separation between the SMARC Evaluation Carrier top side and the I/O Mezzanine PCB bottom side is 3mm.
Standoffs with threads for M2.5 hardware are present on the Evaluation Carrier. There are no parts on the Evaluation
Carrier in the shadow of the I/O Mezzanine, except for the mating Hirose connector and the standoffs. Hence parts up
to 2.5mm tall may be placed on the bottom side of the I/O Mezzanine PCB. On the top side, a part height limit of 6mm is
advised.