Kontron KBox C-101 - Manual (Page 22)

7. System Overview KBox C-101 – User’s Guide (Version 2.00)
7.3.1. X101 - Power Input Connector
The 3-pin connector (X101, Fig. 10) provides the power connection of the KBox C-101 to the appropriate DC main power
supply. For pin assignments refer to the subsection 18.1.1.
The external cable connector is a Phoenix PSC 1,5/ 3-M, 3-pin plug with an SCT-D-SUB 9-KG housing. This power plug is
delivered along with the KBox C-101. Please observe the section 12.1 “Connecting to DC Main Power Supply”. The mating
connector is a Phoenix PSC 1,5/ 3-F connector.
Pin Signal Name
1
2
3
+24 VDC (input)
Functional Earth
0V (input)
Pin 1
Pin 2
Pin 3
Fig. 12: X101 - 24VDC power input connector
7.3.2. X102/X103/X104 - Ethernet Connectors (ETH)
These connectors (X102/X103/X104, Fig. 10) are Gigabit Ethernet 10/100/1000 Mbit/s, IEEE 1588 capable interfaces.
The connectors are standard 8-pin RJ45 type connectors with status LEDs:
‰ Activity/link: green = link up; green blinking = activity.
‰ Speed: off, green, yellow (10/100/1000 MBit/s).
For pin assignment refer to subsection 18.1.6.
7.3.3. X105/X106 - USB 3.0
The KBox C-101 provides two USB 3.0/2.0 interfaces. These connectors (X105/X106, Fig. 10) allow connection of USB 3.0
or USB 2.0 compatible devices to the system. For pin assignment refer to subsection 18.1.5.
7.3.4. X107/X108 - USB 2.0
The KBox C-101 provides two USB 2.0/1.1 interfaces. These connectors (X107/X108, Fig. 10) allow connection of USB-
compatible devices to the system. For pin assignment refer to subsection 18.1.4.
7.3.5. X109 - DisplayPort
This is a DisplayPort compliant interface realized using a standard DisplayPort connector. An external (digital) display can
be connected to the DisplayPort connector (X109, Fig. 10). For pin assignment refer to subsection 18.1.3.
20 www.kontron.com