Kontron KBox C-101 - Manual (Page 36)

10. Accessing Internal Components KBox C-101 – User’s Guide (Version 2.00)
10.1. Top Cover
When used as intended the KBox C-101 is to operate only in closed condition.
Only when the right side cover is fixed with the screws (Fig. 22, pos. 2) and top cover is properly installed,
secured with the knurled screws (Fig. 10, pos. 3) on the front side it is ensured that the user doesn’t have
access to the internal parts of the KBox C-101.
The cover will be fixed to the chassis using the fixing bracket at the rear side of the cover (Fig. 29, pos.3) and the fixing
bracket with captive knurled screws at the front side of the cover (Fig. 29, pos.5).
When inserting the cover, make sure that:
‰ At the rear: the fixing bracket (Fig. 29, pos.3) is inserted properly into the corresponding cover retaining bracket of
the chassis (Fig. 27 pos. 13).
‰ At the front side: the fixing bracket with knurled screws of the cover (Fig. 29, pos.5), is matching properly over the
cover retaining bracket on the front side (Fig. 27 pos. 1).
The fixing bracket with knurled screws (Fig. 29, pos.5) secures the top cover on the front side (Fig. 10, pos. 3).
5
4
1
2 3
Fig. 29: Inside of the top cover with fixing brackets
1 Inside of the top cover
2 Rear part of the top cover
3 Fixing bracket (on the rear side)
4 Air exhaust openings
5 Fixing bracket with knurled screws on the front side
34 www.kontron.com