Kontron KBox C-101 - Manual (Page 28)

7. System Overview KBox C-101 – User’s Guide (Version 2.00)
7.6. Rear Side View
The KBox C-101 is designed for wall mounting, in vertical position inside of a control cabinet.
Please do not remove the screws marked with red (Fig. 26, pos. 2 and 4).
Please observe the mounting instructions included in the section 9.1 “Instructions for Control Cabinet Mount
Installation”, and the outline dimensions in the subsection 16.1 “Mechanical Specifications”. For the dimension of the
KBox C-101 version with the optional fan expansion refer to the subsection 16.2 “Mechanical Specifications of the KBox
C-101 with Fan Tray ”
1
Fig. 26: Rear side of the KBox C-101 system
7.6.1. Functional Earth Stud
There is an M4 functional earth terminal on the lower mounting plate of the KBox C-101 (Fig. 26, pos. 6). This terminal
may be connected as required.
The KBox C-101 with the stud marked with a “Functional Earth” symbol (Fig. 26) has to be grounded to
an appropriate “common earth” connection point.
3
4
5
4
1 Key holes on the upper mounting
plate
2 Screws that secures the upper
mounting plate of the KBox C-101
3 Key holes on the lower mounting
plate
4 Screws that secures the lower
mounting plate of the KBox C-101
5 Chassis bottom
6 Functional Earth stud
6
26 www.kontron.com