Driv ing and pa rki ng, Driving – Mercedes-Benz GL-Class 2014 Owners Manual User Manual

Page 170

Advertising
background image

GO function and a detachable Start/Stop

button.
The Start/Stop button must be inserted in the

ignition lock and the SmartKey with the

integrated KEYLESS-GO function must be in

the vehicle.
Pressing the Start/Stop button several times

in succession corresponds to the different

key positions in the ignition lock. This is only

the case if you are not depressing the brake

pedal.
If you depress the brake pedal and press the

Start/Stop button, the engine starts

immediately.
The Start/Stop button can be removed from

the ignition lock. Then, you can insert the

SmartKey into the ignition lock.

i

You do not have to remove the Start/Stop

button from the ignition lock when you

leave the vehicle. You should, however,

always take the SmartKey with you when

leaving the vehicle. As long as the

SmartKey is in the vehicle:

R

the vehicle can be started using the

Start/Stop button and

R

electrically powered equipment can be

operated.

i

The engine can be turned off while the

vehicle is in motion by pressing and holding

the Start/Stop button for approximately

three seconds.

Key positions with KEYLESS-GO

If Start/Stop button : has not yet been

pressed, this corresponds to the SmartKey

being removed from the ignition.
As soon as the ignition is switched on, all the

indicator lamps in the instrument cluster light

up. If an indicator lamp does not go out after

starting the engine or lights up while driving,

see (

Y

page 326).

X

Insert Start/Stop button : into ignition

lock ;.

i

When you insert Start/Stop button :

into ignition lock ;, the system needs

approximately two seconds recognition

time. You can then use Start/Stop

button :.

X

To switch on the power supply: press

Start/Stop button : once.

The power supply is switched on. You can

now activate the windshield wipers, for

example.

i

The power supply is switched off again if:

R

the driver's door is opened and

R

you press Start/Stop button : twice

when in this position.

X

To switch on the ignition: press Start/

Stop button : twice.

The ignition is switched on.

i

The power supply is switched off again if:

R

the driver's door is opened and

R

you press Start/Stop button : once

when in this position.

168

Driving

Driv

ing

and

pa

rki

ng

Advertising