Drivi ng and parking, Driving systems – Mercedes-Benz GL-Class 2014 Owners Manual User Manual

Page 264

Advertising
background image

Messages in the multifunction display
If a gear change process has not been successful, the following messages may be displayed

in the multifunction display:

Display messages

Possible causes/consequences and M

M Solutions

LOW RANGE Max.

LOW RANGE Max.

Speed 40 km/h

Speed 40 km/h

You have been driving faster than 40 km/h. Additionally, the

indicator lamp on the button in the center console blinks.

X

Drive more slowly to carry out the gear change process.

LOW

LOW RANGE

RANGE Shift

Shift to

to

Position N Briefly

Position N Briefly

The transmission is in position D and you are driving at below

40 km/h.

X

Shift the transmission to N to complete the gear change

process.

LOW

LOW RANGE

RANGE Shifting

Shifting

Canceled Please

Canceled Please

Reactivate

Reactivate

The gear change process was not carried out.

X

Ensure that all gear change conditions are fulfilled and carry out

the gear change process again.

LOW RANGE Stop

LOW RANGE Stop

Apply

Apply Parking

Parking Brake

Brake

A warning tone also sounds. The gear change process has not been

completed. LOW RANGE is in the neutral position. There is no

connection between the engine and the drive wheels.

!

Do not drive any further. You could otherwise damage the

vehicle's drive train.

X

Stop the vehicle. Take into account the road and traffic

conditions when doing this.

X

Depress the electric parking brake (

Y

page 189).

X

Carry out the gear change process again.

If the gear change process has been carried out, the

LOW

LOW RANGE

RANGE

Stop Apply Parking Brake

Stop Apply Parking Brake

message disappears.

ON&OFFROAD menu in the COMAND

display (vehicles with the

ON&OFFROAD package)

You can display some driving systems, driving

programs and additional information in the

COMAND display.

X

Make sure that the SmartKey is in position

2 in the ignition lock.

X

Make sure that COMAND is activated, see

the separate COMAND operating

instructions.

X

Press function button :.

The corresponding displays appear in the

COMAND display:

R

level control

R

steering angle

R

vehicle's angle of inclination

262

Driving systems

Drivi

ng

and

parking

Advertising