Mercedes-Benz GL-Class 2014 Owners Manual - Manual (Page 288)

X Press the : or 9 button to select the
Belt Adjustment Belt Adjustment function.
If the Belt Adjustment Belt Adjustment function is
activated, the vehicle seat belt is shown in
orange in the multifunction display.
X Press the a button to save the setting.
For further information on belt adjustment,
see (
Y
page 57).
Switching the fold-in mirrors with the
locking feature on/off
This function is only available on vehicles with
the memory function (
Y
page 125).
When you activate the Auto. Mirror Auto. Mirror
Folding Folding function, the exterior mirrors are
folded in when the vehicle is locked. If you
unlock the vehicle and then open a door, the
exterior mirrors fold out again.
X Press the = or ; button on the
steering wheel to select the Sett. Sett. menu.
X Press the : or 9 button to select the
Convenience Convenience submenu.
X Press a to confirm.
X Press : or 9 to select the Auto. Auto.
Mirror Folding Mirror Folding function.
If the Auto. Mirror Folding Auto. Mirror Folding function is
activated, the vehicle's exterior mirror is
displayed in orange in the multifunction
display.
X Press the a button to save the setting.
: To fold the exterior mirrors in or out
If you have switched the Auto. Mirror Auto. Mirror
Folding Folding on and you fold the exterior mirrors
in using button : , they will not fold out
automatically (
Y
page 123).
You can then only fold out the exterior mirrors
using button :.
Restoring the factory settings
X Press the = or ; button on the
steering wheel to select the Sett. Sett. menu.
X
Press the : or 9 button to select the
Factory Setting Factory Setting submenu.
X Press a to confirm.
The Reset All Settings? Reset All Settings? message
appears.
X Press the : or 9 button to select
No No or Yes Yes .
X
Press a to confirm the selection.
If you select Yes Yes , the multifunction display
shows a confirmation message.
For safety reasons, the Daytime Running Daytime Running
Lights Lights function in the Lights Lights submenu is
only reset if the vehicle is stationary.
ON&OFFROAD menu
Example: multifunction display
X Press the = or ; button on the
steering wheel to select the ON&OFFROAD ON&OFFROAD
menu.
You can set the current settings to appear in
the ON&OFFROAD ON&OFFROAD menu:
R On-road program (
Y
page 253)
R Off-road program (
Y
page 258)
286
Menus and submenus
On-board
comput
er
and
display
s