Interior lighting control, Crash-responsive emergency lighting, Replacing bulbs – Mercedes-Benz GL-Class 2012 Owners Manual User Manual

Page 125: Important safety notes, Lights and windshield wipers

Advertising
background image

Rear overhead control panel (second row of seats)
:

Switches the reading lamp on/off

Rear overhead control panel (third row of seats)
:

p Switches the left-hand reading lamp
on/off

;

p Switches the right-hand reading
lamp on/off

Interior lighting control

Important notes

In order to prevent the vehicle's battery from
discharging, the interior lighting functions are
automatically deactivated after some time
except for when the SmartKey is in position
2 in the ignition lock.

Automatic interior lighting control

X

To switch on/off: press the | button.
When the automatic interior lighting
control is activated, the button is flush with
the overhead control panel.

The interior lighting automatically switches
on if you:

R

unlock the vehicle

R

open a door

R

remove the SmartKey from the ignition lock

The interior light is activated for a short while
when the SmartKey is removed from the
ignition lock. You can activate this delayed
switch-off using the on-board computer
(

Y

page 226).

Manual interior lighting control

X

To switch the front interior lighting on/

off: press the c button.

X

To switch the rear interior lighting on/

off: press the v button.

X

To switch the reading lamps on/off:

press the p button.

Crash-responsive emergency lighting

The interior lighting is activated automatically
if the vehicle is involved in an accident.

X

To switch off the crash-responsive

emergency lighting: press the hazard

warning lamp button.

or

X

Lock and then unlock the vehicle using the
key.

Replacing bulbs

Important safety notes

Xenon bulbs

If your vehicle is equipped with Xenon bulbs,
you can recognize this by the following: the
cone of light from the Xenon bulbs moves
from the top to the bottom and back again
when you start the engine. For this to be
observed, the lights must be switched on
before starting the engine.

Replacing bulbs

123

Lights and windshield wipers

Z

Advertising
This manual is related to the following products: