Mercedes-Benz GL-Class 2012 Owners Manual - Manual (Page 225)

Example display for vehicles with the Off-Road Pro
engineering package
Settings menu
Introduction
The Settings menu can be used for:
R
restoring the factory settings
R changing the instrument cluster settings
R changing the time/date settings 27
R
changing the light settings
R changing the vehicle settings
R changing the convenience settings
Resetting to factory settings
For safety reasons, the Daytime Running
Lamps function in the Lighting submenu is
only reset when the engine is switched off.
X Press V or U on the steering wheel
to select the
Settings menu.
X Press and hold the . reset button on the
instrument cluster for approximately three
seconds.
A prompt appears in the multifunction
display asking you to confirm by pressing
the . reset button again.
X Press the . reset button again.
The settings of most functions are restored
to the factory settings.
or
X If you want to retain the settings, do not
press the . reset button a second time.
After approximately five seconds, the
Settings menu reappears.
X Press the V or U button to select a
different menu.
Instrument cluster
Selecting the unit of measurement for
distance
This function is only available in Canada.
The
Display unit Speedometer/
Odometer function allows you to choose
whether certain displays appear in kilometers
or miles.
The selected unit of measurement for
distance applies to:
R the analog speedometer
R the odometer and the trip odometer
R
the trip computer
R
the navigation instruction in the
Navigation menu
R DISTRONIC
X Press the V or U button on the
steering wheel to select the
Settings
menu.
X Press the & button to call up the
selection of submenus.
X Press the W or X button to select the
Instrument Cluster submenu.
X Press the & button to select Display
Unit Speedometer/Odometer .
X Press the W or X button to select
km or Miles as the unit of measurement for
distance.
X Press the &, V or U button to
select a different display.
27 This function is not available in vehicles with the navigation module.
Menus and submenus
223
On-board computer and displays
Z