Activating/deactivating air-recirculation mode, Activating/deactivating the residual heat function, To activate/deactivate air-recirculation mode – Mercedes-Benz GL-Class 2012 Owners Manual User Manual

Page 146: To activate/deactivate the residual heat function, Climate control, Operating the climate control system

Advertising
background image

Activating/deactivating air-

recirculation mode

You can deactivate the flow of fresh air if
unpleasant odors are entering the vehicle
from outside. The air already inside the
vehicle will then be recirculated.
The operation of air-recirculation mode is the
same for all control panels.

G

WARNING

Fogged windows impair visibility,
endangering you and others. If the windows
begin to fog on the inside, switching off the
air recirculation mode immediately should
clear interior window fogging. If interior
window fogging persists, make sure the air
conditioning is activated, or press the ¬
button.

X

Turn the SmartKey to position

2 in the

ignition lock.

X

To activate: press the d button.
The indicator lamp in the d button lights
up.

i

Air-recirculation mode is activated

automatically at high outside
temperatures. When air-recirculation mode
is activated automatically, the indicator
lamp in the d button is not lit.
Outside air is added after about 30
minutes.

X

To switch off: press the d button.
The indicator lamp in the d button goes
out.

i

Air-recirculation mode deactivates

automatically:

R

after approximately five minutes if
outside temperatures are less than about
41 ‡ (5 †)

R

after approximately five minutes if
cooling with air dehumidification is
deactivated

R

after approximately 30 minutes if outside
temperatures are over about
41 ‡ (5 †)

i

The air-recirculation mode is not

deactivated automatically at outside
temperatures above 79 ‡ (26 †). After
approximately 30 minutes, outside air is
added.

21

Activating/deactivating the residual

heat function

It is possible to make use of the residual heat
of the engine to continue heating the
stationary vehicle for up to 30 minutes after
the engine has been switched off. The heating
time depends on the temperature that has
been set.

i

The blower will run at a low speed

regardless of the airflow setting.

i

If you activate the residual heat function

at high temperatures, only the ventilation
will be activated. The blower runs at
medium speed.

X

Turn the SmartKey to position

0 in the

ignition lock or remove it.

X

To activate: press the Á button.
The indicator lamp in the Á button lights
up.

X

To switch off: press the Á button.
The indicator lamp in the Á button goes
out.

21

Vehicles with automatic climate control

144

Operating the climate control system

Climate control

Advertising
This manual is related to the following products: