Standard display, Selecting language, Temperature) for status line – Mercedes-Benz CLS-Class 2011 Owners Manual User Manual

Page 122: Controls in detail, Control system

Advertising
background image

Selecting speedometer display mode

X

Press button V or U repeatedly until
the

Settings menu appears in the

multifunction display.

X

Press button &.

X

Move the selection marker with button
W or X to the Instr. Cluster
submenu.

X

Press button & or * repeatedly until
the message

Display Unit Speed-/

Odometer appears in the multifunction
display.
The selection marker is on the current
setting.

X

Press button W or X to set
speedometer unit to

Km or Miles.

Selecting language

X

Press button V or U repeatedly until
the

Settings menu appears in the

multifunction display.

X

Press button &.

X

Move the selection marker with button
W or X to the Instr. Cluster
submenu.

X

Press button & or * repeatedly until
the message

Language appears in the

multifunction display.
The selection marker is on the current
setting.

X

Press button W or X to select the
language to be used for the multifunction
display messages.

Selecting display (speed or outside

temperature) for status line

X

Press button V or U repeatedly until
the

Settings menu appears in the

multifunction display.

X

Press button &.

X

Move the selection marker with button
W or X to the Instr. Cluster
submenu.

X

Press button & or * repeatedly until
the message

Status Line Display

appears in the multifunction display.
The selection marker is on the current
setting.

X

Press button W or X to select the
status line to

Speed or Outside Temp..

You will see the status line display when
you have called up a different display from
the standard display.

Selecting display (speed or outside

temperature) for standard display

X

Press button V or U repeatedly until
the

Settings menu appears in the

multifunction display.

X

Press button &.

X

Move the selection marker with button
W or X to the Instr. Cluster
submenu.

X

Press button & or * repeatedly until
the message

Basic Display appears in

the multifunction display.
The selection marker is on the current
setting.

120

Control system

Controls in detail

219_AKB; 4; 54, en-US
d2ureepe,

Version: 2.11.8.1

2009-05-11T16:21:02+02:00 - Seite 120

Advertising