Replacing bulbs for rear lamps, Practical hints, Replacing bulbs – Mercedes-Benz CLS-Class 2011 Owners Manual User Manual

Page 271

Advertising
background image

X

Place bulb socket B back into the housing
and turn it clockwise until it engages.

X

Align housing cover : and turn it
clockwise until it engages.

High-beam and high-beam flasher bulb

(halogen headlamps only)/high-beam

flasher bulb (Bi-Xenon headlamps only)

X

Turn housing cover ; counterclockwise
and remove it.

X

Turn bulb socket ? with the bulb
counterclockwise and remove it.

X

Pull the bulb out of bulb socket ?.

X

Gently press the new bulb into bulb
socket ?.

X

Place bulb socket ? back into the housing
and turn it clockwise until it engages.

X

Align housing cover ; and turn it
clockwise until it engages.

Front turn signal lamp bulb

X

Turn bulb socket = with the bulb
counterclockwise and remove it.

X

Gently press onto the bulb and turn it
counterclockwise out of bulb socket =.

X

Gently press the new bulb into bulb socket
= and turn it clockwise until it engages.

X

Place bulb socket = back into the housing
and turn it clockwise until it engages.

Parking and standing lamp bulb

Halogen headlamps

X

Turn housing cover ; counterclockwise
and remove it.

X

Pull out bulb socket A with the bulb.

X

Pull the bulb out of bulb socket A.

X

Gently press the new bulb into bulb socket
A.

X

Press bulb socket A back into the lamp.

X

Align housing cover ; and turn it
clockwise.

Bi-Xenon headlamps
In vehicles with Bi-Xenon headlamps, the
bulbs of the parking and standing lamps are
LEDs.

!

Do not replace the LEDs yourself. You

could otherwise damage the LEDs or parts
of the vehicle. Only have the LEDs replaced
at an authorized Mercedes-Benz Center.

Replacing bulbs for rear lamps

Tail lamp unit

The tail lamps are equipped with HiP bulbs
and LEDs. Have them replaced at an
authorized Mercedes-Benz Center.

G

Observe Safety notes, see page 266.

License plate lamps

X

Switch off the ignition.

X

Turn the exterior lamp switch to position
$.

X

Open the trunk.

X

Loosen screws : of lamp cover to be
removed.

X

Remove lamp cover ;.

X

Replace the bulb.

X

Reinstall lamp cover ;.

X

Retighten screws :.

Replacing bulbs

269

Practical hints

219_AKB; 4; 54, en-US
d2ureepe,

Version: 2.11.8.1

2009-05-11T16:21:02+02:00 - Seite 269

Z

Advertising