Mercedes-Benz CLS-Class 2011 Owners Manual - Manual (Page 244)

Display messages Possible causes/consequences and X Solutions
+ Key Not
Detected
(message
appears in
red)
The SmartKey with KEYLESS-GO is not detected while the
engine is running because the SmartKey is not in the vehicle.
X Stop the vehicle as soon as it is safe to do so.
X Engage the parking brake.
X Search for the SmartKey.
The vehicle cannot be locked centrally nor can the engine
be started again after the engine is stopped.
+ Key Not
Detected
(message
appears in
red)
The SmartKey with KEYLESS-GO is not detected while the
engine is running because there is strong radio-frequency
interference.
X Stop the vehicle as soon as it is safe to do so.
X Engage the parking brake.
X Operate the vehicle with the SmartKey in the starter switch.
+ Key Not
Detected
(message
appears in
white)
The SmartKey with KEYLESS-GO is momentarily not detected.
X Change the position of the SmartKey in the vehicle.
X Operate the vehicle with the SmartKey in the starter switch
if necessary.
~ Bluetooth
Ready
The telephone has not yet been connected to the COMAND
system via Bluetooth
® .
X Connect the telephone to the COMAND system via
Bluetooth
® .
¥ Top Up
Washer
Fluid
The fluid level has dropped to approximately 1 /
3
of total
reservoir capacity.
X Add washer fluid ( Y page 181).
242
Vehicle status messages in the multifunction display
Practical hints
219_AKB; 4; 54, en-US
d2ureepe,
Version: 2.11.8.1
2009-05-11T16:21:02+02:00 - Seite 242