The roof rails – Mercedes-Benz GL-Class 2008 Owners Manual User Manual
Page 299
298
Controls in detail
Loading
1 Key
2 Cover cap
3 Sticker FRONT (or REAR)
4 Screw for clamping claw
5 Clamping claw
The front and rear crossbars are of differ-
ent lengths. Please pay close attention to
stickers
3 FRONT and REAR on the cross-
bars.
̈
Unlock cover cap
2 with key 1.
̈
Remove cover cap
2.
Sticker
3 indicating the location,
FRONT or REAR, becomes visible.
̈
Turn screw
4 counterclockwise with
the included Allen wrench until
clamping claw
5 is wide open.
6 Front crossbar
7 Rear crossbar
8 Gaps
9 Markings
a Roof rails
̈
Place front crossbar
6 between
markings
9 on roof rails a.
4 Screw for clamping claw
5 Clamping claw
a Roof rail
̈
Make sure clamping claw
5 lies flush
against the inside of roof rail
a as
shown in the illustration.
If necessary, adjust clamping width of
crossbars (
̈
Slightly tighten screw
4 on both sides
by turning it clockwise.
i
Markings
9 are located on the inside of
each roof rail, indicated by the white lines in the
illustration.
164.boo Seite 298 Freitag, 30. März 2007 12:54 12