Mercedes-Benz GL-Class 2008 Owners Manual - Manual (Page 514)

513
Practical hints
Replacing bulbs
Replacing bulbs
1 Bulb socket
2 Clamp
̈ Press and hold clamps 2.
̈ Pull bulb socket 1 outwards.
Bulb socket
1 Backup lamp
2 Tail lamp, brake lamp, parking and
standing lamp
3 Tail lamp, brake lamp, parking and
standing lamp, side marker lamp
4 Turn signal lamp
5 Rear fog lamp (driver’s side only)
̈ Depending on which bulb needs to be
replaced, turn the respective
bulb
1 - 5 counterclockwise.
̈ Pull the bulb out of the housing.
̈ Insert the new bulb into the bulb sock-
et.
̈ Turn the bulb in the bulb socket clock-
wise carefully.
̈ Insert the bulb socket into the rear
lamp.
̈ Align bulb socket and press bulb sock-
et into rear lamp until it audibly engag-
es.
̈ Make sure bulb socket is attached
properly.
̈ Close the respective cover in the cargo
compartment.
̈ Close the tailgate ( ୴ page 123).
164.boo Seite 513 Freitag, 30. März 2007 12:54 12