Ters – Mercedes-Benz S-Class 2007 User Manual
Page 174
173
Control systems
COMAND navigation system (entering a destination)
While the characters are being selected as
described below, the top list entry
1 al-
ways shows the destination which best
corresponds to the input data as it has
been entered up to that point.
At the same time, COMAND automatically
supplements characters
2 entered by the
user with appropriate characters
3.
̈
Changing language for the input
characters: Select
!.
̈
Select desired language.
̈
Changing character set for the input
characters: Select
#.
Depending on the previous setting, you
will change to letters with special char-
acters or to numbers with special char-
acters.
̈
Selecting characters: Slide
o
m
p
or
rotate
y
m
z
.
̈
Confirming character selection:
Press
n.
̈
Deleting individual characters:
Select
) in the bottom line and
press
n.
̈
Deleting an entire entry: Select
) in
the bottom line and press
n until the
entire entry is deleted.
̈
Canceling an entry: Select “Back” in
the bottom line and press
n.
or
̈
Press back button
L in the center
As soon as COMAND can clearly attribute
the characters entered to a destination,
the input characters
4 disappear.
You see the destination memory list with-
out input characters. Here you can confirm
the current entry or make another selec-
tion.
You can also manually switch to the desti-
nation memory list without input charac-
ters at any time.
̈
Switching manually to the destina-
tion memory list without input char-
acters: Slide
q
m.
or
̈
Select
? in the second line from the
bottom and press
n.
Destination memory list without input
characters
̈
Selecting a destination: Slide
q
m
r
or
rotate
y
m
z
.
̈
Canceling selection: Press back but-
ton
L in the center console
or
୴୴