Mercedes-Benz S-Class 2007 - Manual (Page 626)

625
Practical hints
Replacing bulbs
High beam flasher lamp
In vehicles with Bi-Xenon headlamps, you
can only change the halogen bulb for the
high-beam flasher lamp.
1 Bulb holder
2 Wire position
3 Grip
̈ Turn cover 2 ( ୴ page 624) counter-
clockwise and remove it.
̈ Turn bulb holder 1 counterclockwise
until it disengages.
̈ Take out bulb holder 1.
̈ Take bulb out of holder.
̈ Insert new bulb into holder and press it
all the way down.
The tab of the bulb holder must be po-
sitioned on the upper left-hand side
and wire
2 must point upward and to
the right for the left headlamp, down-
ward and to the left for the right head-
lamp.
̈ Turn bulb holder clockwise until it en-
gages and grip
3 is in a vertical posi-
tion.
IR emitter*
1 Bulb
2 Wire position
̈ Turn cover 2 ( ୴ page 624) counter-
clockwise and remove it.
̈ Turn bulb holder 1 counterclockwise
until it disengages.
̈ Take out bulb holder 1.
̈ Press both catches on left and right
sides of bulb holder
1 and take bulb
out of holder.
̈ Insert new bulb into holder until it en-
gages.
୴୴