Mercedes-Benz S-Class 2007 - Manual (Page 595)

594
Practical hints
What to do if …?
Display Possible cause/consequence Possible solution
Key
not recognized The SmartKey with KEYLESS-GO* is mo-
mentarily not recognized. ̈ Change the position of the SmartKey in the
vehicle.
̈ If necessary, operate vehicle using SmartKey
with KEYLESS-GO* in starter switch under
KEYLESS-GO* button (
୴ page 316).
Key being
initialized…
Please wait The SmartKey with KEYLESS-GO* is being
initialized in the vehicle. ̈ Wait until the message disappears from the
multifunction display.
Remove starting
button, then
insert key The KEYLESS-GO* system is malfunction-
ing. ̈ Remove KEYLESS-GO* button from over
starter switch (
୴ page 316).
̈ Operate the vehicle with the SmartKey in the
starter switch.
Replace key The SmartKey with KEYLESS-GO* must be
replaced. ̈ Visit an authorized Mercedes-Benz Center as
soon as possible.