Restraint, Head restraint tilt – Mercedes-Benz S-Class 2007 User Manual
Page 327
326
Controls in detail
Seats
̈
Switch on the ignition (
̈
Press switch
1 in the front center con-
sole briefly.
The rear head restraints will fold back-
ward.
Placing head restraints upright
̈
Pull the rear head restraint upright until
it locks into position.
Placing power head restraints* upright
(rear outer seats)
̈
Switch on the ignition (
̈
Press and hold switch
1 in the front
center console and hold.
The rear outer seats head restraints
will place upright.
̈
Pull the rear center seat head restraint
upright manually until it locks into posi-
tion.
Rear power head restraints*
(rear outer seats)
1 Placing upright head restraint
2 Folding down head restraint
3 Head restraint tilt
4 Head restraint tilt
̈
Switch on the ignition (
open the respective door.
̈
Press switch up in the direction of
arrow
1.
The rear outer seats power head re-
straint will place upright.
!
Make sure the head restraints engage when
placing them upright manually. Otherwise their
protective function cannot be ensured.
i
When you fasten your seat belt in the rear,
the respective rear outer seat head restraint
places upright.