Mercedes-Benz CLK-Class 2007 Owners Manual User Manual

Page 130

Advertising
background image

129

Controls in detail

Lighting

USA only

By default, the daytime running lamp mode
is deactivated. Activate the daytime
running lamp mode using the control
system, see “Setting daytime running lamp
mode (USA only)” (

page 160).

When the engine is running, and you turn
the exterior lamp switch to position

C

or

B, the manual headlamp mode has

priority over the daytime running lamp
mode.

The corresponding exterior lamps switch
on (

page 126).

Locator lighting and night security
illumination

The locator lighting and the night security
illumination are described in the “Control
system” section, see “Setting locator light-
ing” (

page 161) and “Setting night secu-

rity illumination” (

page 162).

Fog lamps

i

With the daytime running lamp mode

activated and the exterior lamp switch in
position

M, you cannot switch on the high

beam headlamps.

The high beam flasher is available at all times.

For nighttime driving turn the exterior lamp
switch to position

B or U to permit

activation of the high beam headlamps.

Warning!

G

In low ambient lighting or foggy conditions,

only switch from position

U to B with

the vehicle at a standstill in a safe location.

Switching from

U to B will briefly

switch off the headlamps. Doing so while

driving in low ambient lighting conditions

may result in an accident.

i

Fog lamps will operate with the parking

lamps and/or the low beam headlamps on. Fog
lamps should only be used in conjunction with
low beam headlamps. Consult your State or
Province Motor Vehicle Regulations regarding
permissible lamp operation.

i

Fog lamps cannot be switched on with the

exterior lamp switch in position

U. To switch

on the fog lamps, turn the exterior lamp switch to
position

B first.

Advertising