Mercedes-Benz CLK-Class 2007 Owners Manual - Manual (Page 38)

37
Getting started
Unlocking
For more information, see “SmartKey”
(
୴ page 98).
For information on starting the engine us-
ing the SmartKey, see “Starting with the
SmartKey” (
୴ page 51).
SmartKey with KEYLESS-GO*
Pressing the KEYLESS-GO start/stop but-
ton on the gear selector lever corresponds
to turning the SmartKey to the various
starter positions.
If you firmly depress the brake pedal dur-
ing pressing the KEYLESS-GO start/stop
button, the engine starts automatically.
You can also use the SmartKey with
KEYLESS-GO like a normal SmartKey.
KEYLESS-GO start/stop button
1 USA only
2 Canada only
The SmartKey with KEYLESS-GO must be
located in the vehicle.
̈ Make sure the gear selector lever is set
to P.
̈ Do not depress the brake pedal.
! If the SmartKey cannot be turned in the
starter switch, the battery may not be sufficient-
ly charged.
ț Check the battery and charge it if necessary
(
୴ page 447).
ț Get a jump start ( ୴ page 450).
To prevent accelerated battery discharge or a
completely discharged battery, always remove
the SmartKey from the starter switch when the
engine is not in operation.
i The function of the SmartKey overrules the
KEYLESS-GO function.