Mercedes-Benz CLK-Class 2007 Owners Manual - Manual (Page 415)

414
Practical hints
Opening/closing in an emergency
2 Hex wrench
̈ Insert long side of hex wrench 2 into
opening.
̈ Using hex wrench 2, press release
catch down in direction of arrow.
The roll bar extends with a loud sound.
̈ Repeat this step for the second roll bar.
Have the systems checked at an autho-
rized Mercedes-Benz Center as soon as
possible.
Lowering roll bars manually
With the soft top open, you can lower the
roll bars manually after they have been re-
leased.
1 Orientation seam
2 Hex wrench
3 Press wrench down
4 Press head restraint down
̈ Take hex wrench out of its storage
location in the storage well casing
(
୴ page 405).
̈ Align hex wrench so that its long side is
parallel to orientation seam
1 and in-
sert hex wrench 2 into gap on left side
of respective head restraint.
i With the roll bars released, the soft top can-
not be operated using the soft top switch and the
rear head restraints cannot be lowered using the
rear head restraint lowering switch.
Warning!
G
Never lower the roll bars manually unless
the soft top is open. Otherwise, the roll bars
function could be impaired, no longer reduc-
ing your risk of injury in an optimal manner.
Contact an authorized Mercedes-Benz Cen-
ter to have the roll bar lowered when the
soft top is closed.
୴୴