Mercedes-Benz CLK-Class 2007 Owners Manual User Manual
Page 444
Advertising
443
Practical hints
Flat tire
̈
Jack up the vehicle until the wheel is a
maximum of 1.2 in (3 cm) from the
ground. Never start engine while
vehicle is raised.
Removing the wheel
1 Alignment bolt
̈
Unscrew upper-most wheel bolt and
remove.
̈
Replace this wheel bolt with alignment
bolt
1 supplied in the tool kit.
̈
Remove the remaining bolts.
̈
Remove the wheel.
Warning!
G
The jack is intended only for lifting the vehi-
cle briefly for wheel changes. It is not suited
for performing maintenance work under the
vehicle.
ț
Never start the engine when the vehicle
is raised.
ț
Never lie down under the raised vehicle.
!
Do not place wheel bolts in sand or dirt. This
could result in damage to the bolt and wheel hub
threads.
Advertising