Mercedes-Benz SL-Class 2006 Owners Manual User Manual

Page 210

Advertising
background image

209

Controls in detail

Driving systems

Distronic displays in the speedometer
dial

If Distronic detects a vehicle directly
ahead, the DTR indicator lamp

E in the

speedometer dial comes on white.

If Distronic calculates that there is a dan-
ger of collision

ț

the DTR warning lamp

E in the

speedometer comes on red

ț

an intermittent warning sounds

̈

Immediately brake the vehicle to avoid
a collision.

Under no circumstances should the
driver await the intermittent warning
sound before braking. See the follow-
ing warning note.

The intermittent warning sound ceases
and the red DTR warning lamp

E

goes out when the necessary distance
to the vehicle ahead is again estab-
lished.

Warning!

G

Use of Distronic can be dangerous on slip-

pery roads. Rapid changes in tire traction

can result in wheel spin and loss of control.

Distronic does not act upon adverse sight

distance conditions. Do not use Distronic

during conditions of fog and heavy rain,

snow or sleet.

Warning!

G

Close attention to road and traffic condi-

tions is imperative at all times, regardless of

whether or not Distronic is activated.

Use of Distronic can be dangerous on wind-

ing roads or in heavy traffic because condi-

tions do not allow safe driving at a steady

speed.

Distronic will not react to stationary objects

in the roadway (e.g. a stopped vehicle in a

traffic jam or a disabled vehicle). Distronic

will also not respond to oncoming vehicles.

Switch off Distronic:

ț

when changing from the left to the right
lane if vehicles are moving more slowly
in the left lane

ț

when entering a turn lane or highway off
ramp

ț

in complex driving situations, such as in
highway construction zones

In these situations, Distronic will continue to

maintain the set speed unless deactivated.

Distronic is designed and intended only to

maintain a set speed and keep a set dis-

tance from moving objects in front of it.

Warning!

G

The “Resume” function should only be oper-

ated if the driver is fully aware of the previ-

ously set speed and wishes to resume this

particular preset speed.

Advertising